Total Bit Revolution Calculation

I’ve got an email asking me about how to figure out the total bit revolution (RPM) at down hole when the mud motor is used in the drill string and rotating at surface is also conducted.


There are two components contributing in the total revolution of downhole drilling bit using mud motor.


1.The rotor RPM of drilling mud motor– each drilling mud motor has its specific performance data which will tell you how many revolutions per flow rate flowing through it.


For example (see the image below), it shows Rev/Gal which means the rotor will turn 0.147 turn/min per one gallon/min of drilling mud passing thought.


Mud Motor Specs


2. The rotary speed from top drive or rotary table.


The total drilling bit revolution downhole:


The total drilling bit revolution is equal to summation of the rotor RPM at specific flow rate and the rotary speed on surface.


Please follow the example below to determine the bit revolution down hole.


The performance data of mud motor -


Rev/Gal = 0.147


Flow rate = 320 gpm


Rotary speed = 220 rpm


The rotor rpm based on 320 gpm = 0.147 x 320 = 47 rpm


Total bit revolution down hole = 47 + 220 = 267revolution per minute (rpm)


Ref -


Total Bit Revolution When Running A Drilling Mud Motor and Rotating At Surface from drilling formulas blog


View the original article here

1 comments:

  1. i read a lot of stuff and i found that the way of writing to clearifing that exactly want to say was very good so i am impressed and ilike to come again in future.. compare auto insurance quotes now

    ReplyDelete

Related Post